Pinterest Party - Recycled Magazine Crosses

Pin It Our first Pinterest party was a big hit!  Between the spirits and the food and the laughter, we managed to finish most of our crosses--albeit at varying levels of expertise, lol.  {To see the tutorial for this craft, click here.} Take a look at the fun:

Different sizes of folded and wrapped coils. 

Adding to the design.

It seemed as if we were never going to stop folding paper!

The jokes were flying at this end of the table.  :)

Nearing the end--concentrated gluing.

Did I say varying levels?

\

All in all it was a great evening--we had lots of fun and learned something new to boot.

Here's a preview of what our next party will bring:

Modge-podge crosses

Can't wait until then!  In the meantime,

Go Get Crafty, Sister!

Pinterest Party -Our 1st One Ever!

Pin It

Hosting the first ever Pinterest Party (at least for us) should be great fun! Lots of laughs, good company, and spirits are expected...oh yes and time spent creating RECYCLED MAGAZINE CROSSES. Each guest is asked to bring pre-rolled cores and rolls made of 1/2 magazine page rolled into a tight circle + folded pages to use for outside border/frame.

MATERIALS:

1 or 2 old magazines (8 x 10 or 11 x 14)

box cutter

scissors

*14 - 18 small cores

*5 large rolls of varying sizes

*1 large roll to form center of cross

*18-20 folded 1/2 pages to use for outside border/frame

clothes pins

rubber bands

Modge Podge

paint brush

STEP 1: Find 1 or 2 outdated, non-essential magazines (preferably taking up space in the restroom magazine basket). The magazines should have slick pages (avoid those with thicker, smaller pages like National Geographic). Once the magazines have been chosen, try to stick to this same size or magazines for the entire cross.

STEP 2: Remove one page from the magazine. (Actually, I took a box cutter and removed the entire binding from the magazines on my original one.)

STEP 3: Cut this page in half. You will work with half pages to create each of the cores.

STEP 4: Using the half page, fold it in half (lengthwise).

STEP 5: Fold each side to the center.

STEP 6: Repeat by folding each side into the center again.

STEP 7: Be sure edges are flattened by running a ruler along them. Then use Elmer's or stick glue to seal the inner fold together.

STEP 8: Fold the center together. Run a line of glue along one side of the folded paper.

STEP 9: Begin at one end and roll the page along the folded side that has been glued; roll tightly.

Until you reach the end of the page.

STEP 10: Set aside and fold another half page. Follow the same procedure, using glue to seal the center folds together and another line of glue along one side of the folded page. Beginning at the end of the initial roll, begin rolling the new folded page around the core.

STEP 11: This is a building process when producing the larger rolls for the cross and requires wrapping the newly folded pages around the core to make it grow larger and larger. As the core grows, wrap a rubber band around the resultant core to hold it together until the new page is folded and ready to glue on.

We used a 13oz. can of chicken breast to determine the size of the center roll for the cross. Once the roll grew to a size that it just fit into the top of the can, we began to work on the other 6 large rolls. These other 6 were of varying sizes. We also used an additional 14-18 small, "core" rolls to create the final cross shape.

(This cross can be found at TipJunky.) We will post Pinterest Party Pics and our crosses next week!

Peace be with you!

~Sister #1

Other RECYCLED MAGAZINE PROJECTS you might like:

RECYCLED MAGAZINE BOXES with tutorial at "Abstract Octopus"

OR this RECYCLED MAGAZINE BOWL made by gluing rolls around a balloon.